3. Causes and improvement measures of jetting The molten resin flows in the form of jetting. When the flow flows from a narrow place to a wide place, if the flow rate is too fast, it will sometimes fly in a short ribbon pattern and flow without touching the mold, which is called jetting. Some...
Abstract The causes and improvement methods of flow marks and jetting are discussed. The causes of flow marks are analyzed from three aspects such as plastics, molds and injection molding machines. Flow marks can be improved by improving the injection molding process parameters based on the case analysis....
Several commonly used plastic materials for toys are polystyrene and modified polystyrene which is also known as high-impact polystyrene. The two materials can be mixed for injection molding. The more the GPPS composition is, the better the surface gloss and fluidity become. The other polystyrene...
Toilet covers are bathroom products. Now China's bathroom products are mainly distributed in three regions. The first one is the regions of Xiamen and Zhangzhou in Fujian, the second one Cixi, Yuyao and Hangzhou in Zhejiang and the third one...
Medical plastic molds are not only tools for producing plastic medical products, but also endow products with complete structures and accurate dimensions. The final plastic product is obtained by injecting the molten plastic material into the mold cavity. What are the commonly...
Plastic alloys such as PC-ABS, PC-PBT, PC-PMMA, TPU, TPR and TPE refer to a material formed by the mixing of two or more plastics and they have excellent properties of both materials. They are not simple mixtures of two materials. Special equipment and...
PMMA is commonly known as polymethyl methacrylate. It is a non-toxic and environmentally friendly material. It is often used for acrylic sheets, acrylic plastic pellets, acrylic light boxes, signboards, acrylic bathtubs, car taillights, signal lights and instrument panels in...
In the manufacturing of auto parts, instrument panel is one of the most common auto parts. Nowadays, automobile instrument panels are mostly produced by plastic manufacturing. With the development of automobiles in terms of safety and environmental protection, people have higher and higher...
It is common to see the color difference in injection molding. Injection molding machines are scrapped due to color differences in matching parts, which is not uncommon. Color masterbatch, raw material resin, mixing of color masterbatch and raw materials, injection molding machines and molds and injection...