News
Advantages
Low Cost
Topper leverages an offshore plastic mold making plant with a lower cost structure in order to offer lower pricing than Topper's competitors.
High Quality
Quick Turnaround
Topper leverages an offshore plastic mold making plant with a lower cost structure in order to offer lower pricing than Topper's competitors.
High Quality
Topper is ISO 9001:2008 certified, and Topper processing quality systems ensure that your parts are the highest quality possible for your applications.
Quick Turnaround
Topper offers three different shipping methods, including next day air, to accommodate your timing and budget requirements.
Online Quotes
Topper interactive online quotation system provides instant quotes for plastic mold making, injection molding, CNC machining and die casting.
Online Quotes
Topper interactive online quotation system provides instant quotes for plastic mold making, injection molding, CNC machining and die casting.
Follow Us
News
Plastic Shell Materials and Processing Technology for 5G Mobile Phones (Part Two)
- Posted: 07/07/2021 10:07:54
- Hits: 18
PC injection molding In the evolution of the non metal mobile phone case, the plastic case has been upgraded with 3D imitation glass technology. Among them, the PC injection back cover and the middle frame integrated body stand out even more, that is, the integrated Unibody. The raw material is...
Plastic Shell Materials and Processing Technology for 5G Mobile Phones (Part One)
- Posted: 06/21/2021 02:06:14
- Hits: 25
With the advent of the 5G, the demand for metal phone back cover has become less. Because of the massive MIMO technology adopted by 5G, a large amount of antennas need to be added to the phone, and metal will shield and interfere with the signal. The back cover of the phone not made of metal...
The Reason Why These Materials Are Preferred for Car Lights
- Posted: 06/03/2021 04:06:23
- Hits: 860
Usually, car lights consist of reflectors, housings, lenses, electronic circuits, and installation accessories. PMMA, PC, ABS, and PP are the main materials used for car lights in China. 1. Why is the lamp housing made of plastic? There are many reasons for this. Plastic is more elastic than...
Optimization of Stamping Process for Automobile Structural Parts (Part Two)
- Posted: 05/20/2021 11:05:51
- Hits: 17
The inner plate of the upper beam of the water tank of a certain project is shown in Figure 4. When the initial digital model (see Figure 4a) is produced in the selected stamping direction, there is a certain negative angle, and the production process cannot be realized. After the side angle of...
Optimization of Stamping Process for Automobile Structural Parts (Part One)
- Posted: 05/13/2021 10:05:25
- Hits: 13
Abstract: The design of automotive structural parts is a process of continuous improvement and optimization. After the product information is sent to the process department, the process engineer needs to analyze the forming characteristics of the parts, final quality of the product, the...
Applications of Polypropylene in Automotive Exterior Products
- Posted: 03/26/2021 02:03:47
- Hits: 68
PP used in automotive parts PP (polypropylene) is a polymer formed by free radical polymerization of propylene monomer. It is non-toxic, odorless and tasteless, which belongs to a crystalline material with great shrinkage and unstable dimensions. Polypropylene is the most used...
Solutions to Defects of Plastic Injection Molding Parts
- Posted: 02/25/2021 09:02:55
- Hits: 21
Solutions to gas holes 1. Adjust molding conditions to improve fluidity. For example, increase the resin temperature, mold temperature, injection pressure and speed. 2. Adding an exhaust groove and setting a push rod at the place where the weld is generated is also conducive to exhaust. 3. Minimize...
The Defect Analysis of the Typical Automobile Injection Molding Part and Its Solutions
- Posted: 02/15/2021 03:02:55
- Hits: 14
The amount of plastics used in automobiles has become an important indicator of the level of automobile design and manufacturing. At present, about 10% of the materials in China’s automobiles are made from plastics, ranging from bumpers, fenders and other accessories, dashboards, door panels,...
The Injection Molding Process of Glass for Mobile Phones
- Posted: 02/10/2021 03:02:39
- Hits: 22
Do you know the injection molding process of glass for the mobile phone and its key points? Lens Technology is one of the main glass screen supplier for famous mobile phones such as Apple Inc, Samsung, Xiaomi, Huawei, etc., which ranks only second to Bourne Optics. Therefore,...
Topper is a professional plastic mold manufacturer in China, our injection molding service covers all walks of life, including medical, electronics, auto parts, appliance, etc.
Contact Us
Topper Plastic Mold Co., Ltd.
Address: No. 879, Xiahe Road, Xiamen, Fujian, China
Tel: 0086-592-5819200
Email: [email protected]
Website: https://www.plastic-mold.com
Copyright © China Plastic Mold Co., Ltd. Robot Arm for Injection Molding. Privacy Policy | Terms of Service | Sitemap
Website Design & Support: jeawin.com